3 Reasons Not To Clean And Reuse A HEPA Filter
Some air purification units come with washable filters. For example, electrostatic air purifiers are low maintenance units. The beauty of these units is that you can wash filters many times, and there will be no need to purchase new ones. Therefore, you can save tons of money over the long haul. However, you can also invest in a HEPA-based filter as they are known to remove up to 99.97% of particles found in the air. In this article, we are going to talk about why you should not reuse a disposable HEPA filter. Read on to find out more.
Don’t Vacuum them
If you think you can vacuum filters, you need to think again. The problem is that they come with strong fibre that can catch up to 99% airborne particles. Therefore, once these units get clogged, you cannot clean them no matter what.
Therefore, vacuuming these units is not a good idea. If you hold a filter, you will realize that no vacuum cleaner can suck the dirt out of these units.
Don’t Play With them
If you use any method to clean the filters, you will only end up damaging the units. Once it is damaged, it won’t be able to perform the filtering functions. Therefore, there is no use of touching or playing with them.
The only solution is to get these filters replaced as soon as they get dirty. Saving money on the old ones is not a great idea as it is a matter of your health.
Don’t Wash Them
If you think washing the filters can clean them, you are again making a mistake. Although water can be used for cleaning the dirtiest filters, this method can create moisture. We use air purifiers in order to eliminate mold from our rooms.
If you clean your purifiers, you may cause the mould to grow. In these filters, moisture can allow mould to grow. As soon as mould starts to grow inside them, it will generate spores and spread them across your room.
It is important to keep in mind that water may cause severe damage to the filters. Therefore, no matter which method you try to dry them, they won’t do the job. As a matter of fact, the filters won’t work properly once they come into contact with water.
So, we suggest that you don’t save a few dollars and go for any of the cleaning methods described in this article. Instead, the only way out is to go for or a replacement one for your device.
In short, these are just some of the common reasons why you should not clean HEPA filters. Instead, what you need to do is replace the filters as soon as you notice that they are not working properly because of clogged filters. Hopefully, these tips will help you get the most out of your air purifiers.