6 Tips for Your Home Wiring

Are you looking for some simple tips for wiring up your home? If so, we suggest that you be careful while using our tips. Usually, electricity wiring is a task that involves a lot of danger. Therefore, you should be careful. You can do the wiring on your own or you can hire a professional, which is the safest option.

Tip 1: Size of the Enclosure

Choosing an enclosure with plenty of room is recommended. As a matter of fact, this enclosure will be the center of the installation. Generally, we recommend that you have 20% of additional space for future expansions.

Moreover, if your house is newly built, you may want to have sub distribution boards as well.

Tip 2: Terminals Should be Used

Ideally, you should go for quality terminal blocks for your enclosure. The benefit of these terminal blocks is that they help you keep the wiring organized. Aside from this, you may want to use label holders and separators as well. Another benefit of using them is that you won’t have to stuff many cables into a single spot.

Tip 3: Layout of the Enclosure

It’s a good idea to plan the layout of the termination of your cable, equipment and circuit protection in the distribution board. Ideally, we suggest that the circuit board should be kept towards the downside of the enclosure with the power supplies.

For cable routing, you should leave some space on the both sides of the same enclosure. The low voltage cables should be on the left side of the box and the high voltage cable should be on the right side.

Tip 4: Finger Trunking

For better organization of the wiring, you should use finger trunking. You can place the trunking between the DIN rails. Keep in mind that the outer trunking has to be twice as big as the other trunking.

Tip 5: Pick The Right Cable

Don’t try to save money on the cables as cables are the backbone of the electricity system in any house or office. Ideally, you may want to buy CAT7 cables. It’s a twisted pair cable with a strong shield around it. It boasts lower voltage drop and can carry more power. These cables are better in any perspective. That’s the reason most professionals recommend these cabling for home or office wiring.

Tip 6: Documentation is Necessary

Often, most homeowners don’t understand the importance of putting labels on their input and output cables. Labeling will make it easier for you to set up the configuration. Your electrical system will remain flexible and easy to modify and expand down the road. Moreover, the access to the enclosure will also be a lot easier down the road.

So, these are some easy tips that you can use when doing the electricity wiring in your home. You will be more careful throughout the process. However, if you have never done any wiring chores before, we highly recommend that you hire a qualified electrician to do the work. This will keep you on the safe side.